Wall Mount Installation

What You'll Need

Mounting to Drywall (Procedure Shown Below):

  • 65lb drywall anchors (Included)
  • #8 screws (Included)
  • Drill with 1/4" drill bit
  • Phillips extension (If using a drill)
  • Long Screwdriver (If not using a drill)
  • Leveler tool

Mounting to Solid Backing:

  • #8 screws (Included)
  • Drill with 1/8" drill bit (recommended but not required)
  • Phillips extension (If using a drill)
  • Long Screwdriver (If not using a drill)
  • Leveler tool

Mark & Level

  • Place your mount on the wall (Stud is recommended).
  • Level the mount.
  • Mark the hole locations.

Drill

  • Drill a 1/4" hole for drywall anchors.

Insert Anchors

  • Tap the drywall anchors into the drilled hole.

Install

  • Align the mount with the holes and install the screws.
  • Be careful not to overtighten.

Mount

  • Place the rifle on the mount and show it off!